مواد المساحيق السائبة

مواد المساحيق السائبة

[الحلول]

Bulk Powder
Materials

Bulk Powder Materials Transport supports building materials and electric power industries, mainly carrying cement, fly ash, mineral powder, and lime powder. These goods are prone to flying, moisture absorption, and agglomeration. Transportation leakage causes material loss, pollutes the air and roads, and triggers environmental issues. The core carrier is tank semi-trailers, requiring IP65+ sealing performance and efficient unloading to boost turnover. It mainly serves building material factories, mixing stations, and power plants.
JJFA 5 2

الحلول

Custom IP65 level fully sealed tank semi-trailers, the inner wall of the tank is mirror polished to reduce powder residue; the tank mouth adopts a triple lip seal structure, matched with high-strength sealing strips to achieve dustproof, waterproof and leak-proof; the unloading system adopts fully automatic pneumatic control, and the powder is quickly pushed to the unloading port through high-pressure air flow, the unloading speed is increased to 2 minutes per ton, and the single unloading time is shortened to 30-40 minutes.
The overseas parts supply adopts the “quality first + quick supply” plan: select parts suppliers with international quality certification in advance, equip overseas transport vehicles with high-quality common parts such as seals and pneumatic valves, and ship them together with the tank trucks; for special parts needs, the domestic warehouse establishes an exclusive inventory and ships them urgently through international reliable logistics lines to ensure delivery within 7-10 days. At the same time, a parts installation guide is provided to assist overseas personnel in quick replacement.

Customer Pain Points

Ordinary tank semi-trailers have a single-layer seal with poor performance, prone to powder leakage on bumpy roads or pressure changes. With a 1%-2% leakage rate, 10,000 tons of annual cement transport loses 100-200 tons, polluting the environment and risking fines.
Traditional mechanical unloading is slow, averaging 5-8 minutes per ton. A single unloading takes 1-2 hours, leading to low vehicle turnover—only 2-3 daily trips, which fails to meet the high-frequency needs of mixing stations and similar scenarios.
Most parts suppliers near overseas building materials projects are small traders, offering poor-quality, mismatched seals and pneumatic valves. A 15-20-day procurement cycle delays tank truck repairs, causing transport hold-ups and hindering mixing station production.

Achieved Results

Yufei’s IP65 sealing structure effectively curbs leakage, cutting the loss rate below 0.1%. For 10,000 tons of annual cement transport, it reduces leakage by 90-190 tons, avoids environmental fines and meets green transport standards.
Pneumatic efficient unloading cuts single-trip turnover by over 40%, boosting vehicles’ daily trips from 2-3 to 3-5. With 50 tons per trip, this adds 50-100 tons daily, significantly enhancing transport efficiency for bulk powder materials.
The fast and stable parts supply increases the timeliness of overseas parts supply by 60%, reduces the transportation delay rate by 85%, and keeps the tank truck attendance rate above 95%, which strongly guarantees the continuous production of overseas building materials projects.
[Applicable Industries]

Key Scenarios for Efficient Powder Turnover

Building materials industry covering ready-mixed concrete production and new building material powder transport, power engineering involving thermal power plant fly ash disposal and desulfurized gypsum transportation, cement production enterprises including cement clinker transshipment and finished cement distribution, mixing stations with raw material supply for commercial concrete batching plants and powder transport for special mortar production, mining powder transportation encompassing metal ore powder transport after separation and non-metallic mineral powder processing and distribution.

Implementation Progress

Upgraded Sealing And Discharge Technology
100%
Certification Of Overseas Parts Suppliers
88%
Large-scale Application In Building Materials Projects
70%
Optimization Of Environmental Performance Indicators
50%

IP65 sealing:

Triple lip seal + dust-proof end cover; helium-tested welds (leakage <0.001Pa·m³/s) eliminate powder flying.

Efficient pneumatic unloading:

High-pressure fan ensures 2min/ton speed; anti-residue design keeps powder residue <0.3%.

Anti-adhesion upgrade:

Mirror polishing + Teflon coating reduce adhesion; wear-resistant steel adapts to cement and mineral powder.

Pressure balance:

Breather valve + safety valve prevent tank deformation from pressure difference, enhancing operation safety.
[الحلول]

مواد المساحيق السائبة

Bulk Powder Materials Transport supports building materials and electric power industries, mainly carrying cement, fly ash, mineral powder and lime powder. These goods are prone to flying, moisture absorption and agglomeration. Transportation leakage causes material loss, pollutes air and roads, and triggers environmental issues. The core carrier is tank semi-trailers, requiring IP65+ sealing performance and efficient unloading to boost turnover. It mainly serves building material factories, mixing stations and power plants.
JJFA 5 2

الحلول

Custom IP65 level fully sealed tank semi-trailers, the inner wall of the tank is mirror polished to reduce powder residue; the tank mouth adopts a triple lip seal structure, matched with high-strength sealing strips to achieve dustproof, waterproof and leak-proof; the unloading system adopts fully automatic pneumatic control, and the powder is quickly pushed to the unloading port through high-pressure air flow, the unloading speed is increased to 2 minutes per ton, and the single unloading time is shortened to 30-40 minutes.
The overseas parts supply adopts the “quality first + quick supply” plan: select parts suppliers with international quality certification in advance, equip overseas transport vehicles with high-quality common parts such as seals and pneumatic valves, and ship them together with the tank trucks; for special parts needs, the domestic warehouse establishes an exclusive inventory and ships them urgently through international reliable logistics lines to ensure delivery within 7-10 days. At the same time, a parts installation guide is provided to assist overseas personnel in quick replacement.

Customer Pain Points

Ordinary tank semi-trailers have a single-layer seal with poor performance, prone to powder leakage on bumpy roads or pressure changes. With a 1%-2% leakage rate, 10,000 tons of annual cement transport loses 100-200 tons, polluting the environment and risking fines.
Traditional mechanical unloading is slow, averaging 5-8 minutes per ton. A single unloading takes 1-2 hours, leading to low vehicle turnover—only 2-3 daily trips, which fails to meet the high-frequency needs of mixing stations and similar scenarios.
Most parts suppliers near overseas building materials projects are small traders, offering poor-quality, mismatched seals and pneumatic valves. A 15-20-day procurement cycle delays tank truck repairs, causing transport hold-ups and hindering mixing station production.

Achieved Results

Yufei’s IP65 sealing structure effectively curbs leakage, cutting the loss rate below 0.1%. For 10,000 tons of annual cement transport, it reduces leakage by 90-190 tons, avoids environmental fines and meets green transport standards.
Pneumatic efficient unloading cuts single-trip turnover by over 40%, boosting vehicles’ daily trips from 2-3 to 3-5. With 50 tons per trip, this adds 50-100 tons daily, significantly enhancing transport efficiency for bulk powder materials.
The fast and stable parts supply increases the timeliness of overseas parts supply by 60%, reduces the transportation delay rate by 85%, and keeps the tank truck attendance rate above 95%, which strongly guarantees the continuous production of overseas building materials projects.
[Applicable Industries]

Key Scenarios for Efficient Powder Turnover

Building materials industry covering ready-mixed concrete production and new building material powder transport, power engineering involving thermal power plant fly ash disposal and desulfurized gypsum transportation, cement production enterprises including cement clinker transshipment and finished cement distribution, mixing stations with raw material supply for commercial concrete batching plants and powder transport for special mortar production, mining powder transportation encompassing metal ore powder transport after separation and non-metallic mineral powder processing and distribution.

Implementation Progress

Upgraded Sealing And Discharge Technology
100%
Certification Of Overseas Parts Suppliers
88%
Large-scale Application In Building Materials Projects
70%
Optimization Of Environmental Performance Indicators
50%

IP65 sealing:

Triple lip seal + dust-proof end cover; helium-tested welds (leakage <0.001Pa·m³/s) eliminate powder flying.

Efficient pneumatic unloading:

High-pressure fan ensures 2min/ton speed; anti-residue design keeps powder residue <0.3%.

Anti-adhesion upgrade:

Mirror polishing + Teflon coating reduce adhesion; wear-resistant steel adapts to cement and mineral powder.

Pressure balance:

Breather valve + safety valve prevent tank deformation from pressure difference, enhancing operation safety.
[Products]

Products suitable for general logistics and transportation solutions

  • نصف مقطورة صهريج المسحوق السائب

    نصف مقطورة صهريج المسحوق السائب
    This is a heavy-duty powder tank semi-trailer from Yufei brand (manufactured in Shandong, China), primarily designed for transporting bulk cement and powdered materials. It is compatible with truck tractors and is a professional material transport equipment for the infrastructure and building materials industries.
    Key Features
    • Ultra-heavy load capacity + Multi-material adaptability: Maximum load capacity of up to 70 tons, with material options including aluminum, steel, and stainless steel, combined with a high-strength steel main structure, balancing load-bearing strength with lightweight design and corrosion resistance for different transportation scenarios;
    • Flexible configuration + Durability in harsh conditions: Axles support multiple brands including Fuwa, BPW, and Jin Sheng, with mechanical or air suspension options. V-shaped or W-shaped tank structures are suitable for bulk material unloading and can adapt to harsh road conditions;
    • Customization + Professional adaptation: Fixed dimensions (12500 x 2500 x 4000mm) match industry transportation standards, with customizable exterior colors, specifically designed for cement and bulk powder materials;
    • Comprehensive service guarantee: Providing video technical support, online service, and free spare parts to reduce operation and maintenance costs.
    /
نقل المعدات الهندسية النقل:

المقطورات المخصصة توفر حلولاً فعالة

تقوم Yufei بحل مشاكل نقل المعدات الهندسية لشركة خنان لتأجير المعدات:
نقاط ألم العميل:
عدم كفاية القدرة الاستيعابية للحفارات التي تزن 35 طناً، والتأخير بسبب ضعف قدرات الدوران على طرق مواقع البناء الضيقة، وتجاوز مدة تسليم المقطورات 45 يوماً.
الحل:
مقطورات مخصصة منخفضة السعة 80 طناً مزودة بمنصات شحن بطول 1.2 متر ومزودة بمقود هيدروليكي، مع خطوط إنتاج مرنة للتسليم السريع.
KH AL 1 1
نقل المواد الخطرة:

شاحنات الصهاريج من الفئة A تعزز السلامة وتزيد الأرباح

حلّت Yufei تحديًا أساسيًا لشريكها اللوجستي، شركة Sinopec، في نقل المواد الخطرة:
نقاط ألم العميل:
تنطوي شاحنات الصهاريج القديمة على مخاطر تسرب كبيرة، ويحد الوزن الذاتي البالغ 12 طناً من سعة الحمولة، ويتجاوز استهلاك الوقود 35 لتراً.
الحل:
تحتوي الناقلة من الفئة A على خزان 304 غير قابل للصدأ، وأجهزة أمان ثلاثية وهيكل خفيف الوزن 0690.
KH AL 2
الخدمات اللوجستية العامة:

مقطورة الحصة المقطورة تحل تحديات سعة النقل

تساعد Yufei إحدى شركات الخدمات اللوجستية في شاندونغ في التغلب على مشاكل النقل خلال مواسم ذروة التجارة الإلكترونية:
نقاط ألم العميل:
تتسم المقطورات القديمة ببطء أوقات التحميل والتفريغ، وسعتها المحدودة للبضائع الضخمة، واستهلاكها للوقود الذي يتجاوز 32 لتراً، وعدم كفاية سعة النقل خلال مواسم الذروة.
الحل:
مقطورات قابلة للطي قابلة للتخصيص، هيكل فولاذي خفيف الوزن Q690 + تفريغ ذاتي هيدروليكي.
KH AL 3
[دراسات حالة العميل]

Yufei’s customized solutions

تتخذ شركة Yufei من ليانغشان مقراً لها، وهي متخصصة في صناعة المقطورات ذات الأغراض الخاصة/شبه المقطورات منذ عام 2008، مع وجود حالات خدمة حقيقية في جميع أنحاء العالم تثبت قدراتها التصنيعية الذكية.
[دراسات حالة العميل]

Yufei’s customized solutions

تتخذ شركة Yufei من ليانغشان مقراً لها، وهي متخصصة في صناعة المقطورات ذات الأغراض الخاصة/شبه المقطورات منذ عام 2008، مع وجود حالات خدمة حقيقية في جميع أنحاء العالم تثبت قدراتها التصنيعية الذكية.
نقل المعدات الهندسية النقل:

المقطورات المخصصة توفر حلولاً فعالة

تقوم Yufei بحل مشاكل نقل المعدات الهندسية لشركة خنان لتأجير المعدات:
نقاط ألم العميل:
عدم كفاية القدرة الاستيعابية للحفارات التي تزن 35 طناً، والتأخير بسبب ضعف قدرات الدوران على طرق مواقع البناء الضيقة، وتجاوز مدة تسليم المقطورات 45 يوماً.
الحل:
مقطورات مخصصة منخفضة السعة 80 طناً مزودة بمنصات شحن بطول 1.2 متر ومزودة بمقود هيدروليكي، مع خطوط إنتاج مرنة للتسليم السريع.
KH AL 1 1
نقل المواد الخطرة:

شاحنات الصهاريج من الفئة A تعزز السلامة وتزيد الأرباح

حلّت Yufei تحديًا أساسيًا لشريكها اللوجستي، شركة Sinopec، في نقل المواد الخطرة:
نقاط ألم العميل:
تنطوي شاحنات الصهاريج القديمة على مخاطر تسرب كبيرة، ويحد الوزن الذاتي البالغ 12 طناً من سعة الحمولة، ويتجاوز استهلاك الوقود 35 لتراً.
الحل:
تحتوي الناقلة من الفئة A على خزان 304 غير قابل للصدأ، وأجهزة أمان ثلاثية وهيكل خفيف الوزن 0690.
KH AL 2
الخدمات اللوجستية العامة:

مقطورة الحصة المقطورة تحل تحديات سعة النقل

تساعد Yufei إحدى شركات الخدمات اللوجستية في شاندونغ في التغلب على مشاكل النقل خلال مواسم ذروة التجارة الإلكترونية:
نقاط ألم العميل:
تتسم المقطورات القديمة ببطء أوقات التحميل والتفريغ، وسعتها المحدودة للبضائع الضخمة، واستهلاكها للوقود الذي يتجاوز 32 لتراً، وعدم كفاية سعة النقل خلال مواسم الذروة.
الحل:
مقطورات قابلة للطي قابلة للتخصيص، هيكل فولاذي خفيف الوزن Q690 + تفريغ ذاتي هيدروليكي.
KH AL 3
[اتصل بنا]

جاهز للعثور على
حل المقطورة المثالي

دعم على مدار الساعة طوال أيام الأسبوع
استشارة مجانية
الخبراء المعتمدون
BJ 5 1
BJ 5 2
BJ 5 3
BJ 5 4
BJ 5 5
BJ 5 6
BJ 5 7
BJ 5 8
官网询盘网询盘